PRODUCTS

PISTON 15 W 40 has been accredited with API CF-4 /CH4/CI4/CI4+ donut by API. It also meets MB 228. 1, CCMC D-4/G-4/PD-2, MIL-L-2104E. Recommended for all naturally aspirated as well as turbocharged diesel engines in commercial vehicle, utility vehicles, cars & jeeps, earth moving & Construction equipment’s & DG sets.

• Long Drain & prolonged engine life
• Extended TBN quality reserve
• Reduced oil consumption
• Excellent soot & sludge control
• Prolonged engine life

Packing Available In :- 500ml, 1ltr, 3ltr, 3.5ltr, 5ltr, 7.5ltr, 10ltr, 20ltr, 50ltr, 210ltr.

Packing Available In :- 500ml, 1ltr, 3ltr, 3.5ltr, 5ltr, 7.5ltr, 10ltr, 20ltr, 50ltr, 210ltr.

• Superior performance in terms of oxidation stability dispersancy characteristics and energy efficiency.
• Excellent sludge control and extra wear protection at high temperatures and severe operating conditions.
• Outstanding overall engine cleanliness and also provide long engine life.
• Fuel savings and low oil top up.
• Catalytic Converter Compatible.

PISTON 4T Plus 20W-40 ​is premium multi grade engine oil designed to meet the demanding lubrication requirements of all modern Four Stroke engines. Meets API SN, JASO-MA-2 engine test requirements. Recommended for use in 4 Stroke vehicle leading manufacturers.

• Optimized Co-efficient of Friction
• Sludge & Varnish Control
• Possess absolute controls of corrosive wear
• Excellent thermal & oxidation stability
• Prolonged engine life & enhanced drain
• Outstanding engine cleanliness & multi grading

Packing Available In :- 900ml, 1ltr, 50ltr, 210ltr.

PISTON GEAR API GL-4, MIL-L-2105 and EP type GL_4 level of IS: 1118:1992 Application areas are Synchromesh transmissions & Manual Transmission of automobiles

• Excellent thermal & chemical stability.
• Protection against rust & corrosion ensuring longer trouble free protection.

Packing Available In :- 500ml, 1ltr, 5ltr, 10ltr, 20ltr, 50ltr, 210ltr.

PISTON SYNTH is blended with synthetic Group III base stocks blended with synergistic additive system for outstanding detergency. The additive chemistry and dosage are carefully optimized for control on elements resulting in retention of effectiveness of catalytic converters. This delicately balanced composition provides and exceeds tough industry performance standards thus ensuring reliability, emission control economy and endurance.

APPLICATION

PISTON SYNTH is recommended for modern gasoline engines for passenger cars and vehicles

PERFORMANCE BENEFITS

• Synthetic Group III based engine oil recommended for high-performance gasoline engines.
• Based on cutting edge technology with a tailor made additive system.
• Formulated for extra wear protection for long life of oil and engine.
• Provides fuel economy and resource conserving as per ILSAC GF

Packing Available In :- 1ltr, 3ltr, 3.5ltr, 20ltr, 50ltr, 210ltr.

PISTON SYNTH exceeds the requirement of API SN and ILSAC GF 5 for gasoline engines.

PISTON HLP 32,46,57,68,N68,100,121,150,176,220,320,460

PISTON HYDRO oils designed for use in circulating systems are made from high viscosity index; chemically stable base stocks which are further fortified with antioxidants, anticorrosion, antiwear and antifoam additives. They meet the requirements of high pressure system and also of where high pump speeds are encountered.

Characteristics:

• Right viscosity to satisfy the demands of hydraulic pump and the designed system.
• High viscosity index to restrict viscosity changes under operating condition.
• Good film strength and antiwear properties to Minimize wear of pump, valves, Cylinders, pistons etc.
• Maximum demulsibility to allow entrained water to settle down.
• Excellent corrosion resistance to prevent rusting and corrosion of metal parts.
• Resistance to foaming to ensure prompt and efficient functioning.
• High chemical stability to ensure long and trouble free service life.

These grades are recommended for use in screw compressors, vacuum pumps, Miming machinery and machine tools where EP types of oils are required. For use their screw compressors, for use in their compressors. Use in Injection moulding machinery.

Packing Available In :- 5ltr, 10ltr, 20ltr, 50ltr, 210ltr.